標準號：BS 7412-2007
中文標準名稱：未增塑聚氯乙烯(PVC-U)擠制空心型窗和門具規范
英文標準名稱：Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles
標準類型：Q74
發布日期：2007/4/30 12:00:00
實施日期：2007/4/30 12:00:00
中國標準分類號：Q74
國際標準分類號：91.060.50
引用標準：BS 4255-1;BS 6100-1;BS 6100-1.3.5;BS 6100-1.3.6;BS 6100-1.5.1;BS 6100-1.6;BS 6262;BS 6375;BS 7722;BS 7950-1997;BS 8000-7;PAS 24-1-1999;BS EN 485-2;BS EN 514;BS EN 755-9;BS EN 515;BS EN 572;BS EN 1027;BS EN 1096;BS EN 1279;BS EN 1670-1998;BS EN 1863;BS EN
適用范圍：This British Standard specifies requirements for the design, fabricationand performance of windows and glazed doorsets made from PVC-Uextruded hollow profiles.This British Standard applies to windows and doorsets manufacturedfrom PVC-U hollow profiles incorporating fusion welded corner joints.It applies to windows and doors fabricated into frames in a factory, tobe installed vertically (within 15°) into the external face of buildings, assingle or multi-light units, in coupled assemblies when appropriate, ofthe following types:a) windows:1) hinged: side-hung (open in or out), top-hung (open out),bottom-hung (open in), tilt and turn or turn before tilt;2) projecting: side-hung (open in or open out) and top-hung(open out or reversible);3) pivoted: horizontal and vertical (hung centrally or off-centre)including reversible;4) sliding: horizontal and vertical;5) side-hung: fully reversible;6) fixed light;b) doors:1) single leaf single-swing doors with or without side lights andtop panels;2) double leaf single-swing doors with or without side lights andtop panels.It is applicable to assemblies in which any frame member is not longerthan 3 m. It does not apply to curtain walls that span across horizontalstructural members of floors but is applicable to windows within acurtain walling system.It is applicable to assemblies up to the point of installation.NOTE Guidance on the evaluation of conformity is given in Annex A.Guidance on durability and recycling is given in Annex B.