標準號：BS EN 61000-6-4-2007+A1-2011
中文標準名稱：電磁兼容性(EMC).通用標準.工業環境排放標準
英文標準名稱：Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
標準類型：L06
發布日期：2007/2/28 12:00:00
實施日期：2007/2/28 12:00:00
中國標準分類號：L06
國際標準分類號：33.100.10
引用標準：IEC 60050-161;IEC 61000-4-20-2010;CISPR 11-2009;CISPR 14-1-2005;CISPR 16-1-1-2010;CISPR 16-1-2-2003;CISPR 16-1-4-2007;CISPR 16-2-1-2008;CISPR 16-2-3-2006;CISPR 16-4-2-2003;CISPR 22-2008
適用范圍：This part of IEC 61000 for EMC emission requirements applies to electrical and electronicapparatus intended for use in industrial environments as described below.Emission requirements in the frequency range 0 Hz to 400 GHz are covered. No measurementneeds to be performed at frequencies where no requirement is specified.This generic EMC emission standard is applicable if no relevant dedicated product or productfamilyEMC emission standard exists.This standard applies to a apparatus intended to be connected to a power network suppliedfrom a high or medium voltage transformer dedicated to the supply of an installation feedingmanufacturing or similar plant, and intended to operate in or in proximity to industrial locations,as described below. This standard applies also to apparatus, which is battery operated andintended to be used in industrial locations.The environments encompassed by this standard are industrial, both indoor and outdoor.Industrial locations are in addition characterised by the existence of one or more of thefollowing examples:– industrial, scientific and medical (ISM)1)) apparatus;– heavy inductive or capacitive loads that are frequently switched;– high currents and associated magnetic fields.The object of this standard is to define the emission test requirements for apparatus defined inthe scope in relation to continuous and transient, conducted and radiated disturbances.The emission requirements have been selected so as to ensure that disturbances generated byapparatus operating normally in industrial locations do not exceed a level that could preventother apparatus from operating as intended. Fault conditions of apparatus are not taken intoaccount. Not all disturbance phenomena have been included for testing purposes in thisstandard but only those considered as relevant for the equipment covered by this standard.These requirements represent essential electromagnetic compatibility emission requirements.Requirements are specified for each port considered.