標準號：BS EN 12697-12-2008
中文標準名稱：瀝青混合料.熱混瀝青的試驗方法.瀝青試樣的水敏感度的測定
英文標準名稱：Bituminous mixtures — Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens
標準類型：E43
發(fā)布日期：2008/7/31 12:00:00
實施日期：2008/7/31 12:00:00
中國標準分類號：E43
國際標準分類號：93.080.20
引用標準：EN 1426;EN 12697-6;EN 12697-8;EN 12697-23;EN 12697-27;EN 12697-29;EN 12697-31;EN 12697-32;EN 12697-33;EN 13108-1
適用范圍：This European Standard describes three test methods for determining the effect of saturation and acceleratedwater conditioning.These methods can be used to evaluate the effect of moisture with or without anti-stripping additives includingliquids, such as amines, and fillers, such as hydrated lime or cement:? method A uses the indirect tensile strength of cylindrical specimens of bituminous mixtures;? method B uses the compression strength of cylindrical specimens of bituminous mixtures;? method C defines the bonding value of soft asphalt mixtures 1 h after mixing, where the bonding ofbitumen and aggregate can be equated to a bonding value.Method A and method B give the same result on average. However, if the slenderness of the specimens isless than 0,5, method B is not suitable.Method C is suitable for soft asphalt mixtures with bitumen of viscosity at 60 oC of 4000 mm2/s or less, forwhich methods A and B are not suitable.NOTE Methods A and B are suitable for soft asphalt mixtures with bitumen of viscosity at 60 oC greater than4000 mm2/s.