標準號：DIN EN 15061-2009
中文標準名稱：機械的安全性 帶加工生產線機械和設備用安全要求
英文標準名稱：Safety of Machinery - Safety requirements for strip processing line machinery and equipment; German version EN 15061:2007+A1:2008
標準類型：C66
發布日期：1999/12/31 12:00:00
實施日期：2009/5/1 12:00:00
中國標準分類號：C66
國際標準分類號：77.180
引用標準：EN 614-1-2006;EN 614-2;EN 626-1;EN 626-2;EN 689;EN 842;EN 894-1;EN 894-2;EN 894-3;EN 953-1997;EN 981;EN 982;EN 983;EN 999;EN 1032;EN 1037-1995;EN 1050;EN 1088;EN 1127-1;EN 1248;EN 1299;EN 1760-2;EN 1837;EN 12094-1;EN 12198-3;EN 12254;EN 13478;EN 13480-1;E
適用范圍：This European Standard defines the health and safety requirements of strip processing lines (see 3.1).This European Standard deals with all significant hazards, hazardous situations and events relevant for stripprocessing line machinery and equipment, when used as intended and under conditions foreseen by themanufacturer, but also includes foreseeable faults and malfunctions in case of misuse.This European Standard specifies the requirements to ensure the safety of persons which are to beconsidered and met during the design, assembly, transport, commissioning, operation, maintenance anddecommissioning of the equipment.This European Standard applies to:Strip processing lines for treating metal strip: from take-over point (see 3.6) of the entry section (terminalequipment, see 3.2) through the process (processing and terminal equipment, see 3.3 and 3.2) up to the take-over point of the exit section or interface to other lines (terminal equipment).This European Standard does not cover:-- Furnaces in accordance with EN 746-1, EN 746-2 and EN 746-3;-- Dryers and ovens in accordance with EN 1539;-- Coil transporting system before take-over-point at the entry section and after take-over-point at the exit section, e. g., hook conveyors, overhead cranes, fork lift and railway trucks and other vehicles;-- Storage equipment for coils;-- Rolling mill stands (i. e., skin pass and reduction stands) according to prEN 15094;-- Rollshop equipment.If applicable, the safety requirements of those standards mentioned above should be considered.This European Standard is not applicable to strip processing line machinery and equipment, which aremanufactured before the date of publication of this standard by CEN.