標準號：NEN-EN 50089-1982
中文標準名稱：用金屬包裹的和充氣的高壓開關材料澆注樹脂隔板
發布日期：1992/11/1 12:00:00
實施日期：1999/12/31 12:00:00
適用范圍：This Standard applies to cast resin partitions pressurized with inect gas-es, for example sulphur hexafluoride or a mixture of gases such as sulphur hexafluoride and nitrogen used in indoor or outdooc installations of high-voltage switehgear and controlgear, where the gas is used principally for its dielectric and/or arc-quenching properties, with rated voltages1 kV and up to and including 52 kV and with gas-filled compartments with design pressure greater than 3 bar (gauge) - . and with rated voltage 72,5 kV and above.The partitions comprise pressurized barriers in electrical equipment not necessarily liraited to the following examples:circuit breakers, switch disconnectors, disconnectors, earthing switches, current transformers, voltage transformers, surge arrestors, busbars and connections, cable connections.This Standard does not apply to high voltage bushings (see HD 358 S3 (IEC 517)).2.2 Quality assuranceIt is the intention of this Standard that the switehgear manufacturer shall be responsible for achieving and maintaining a consistent and adequate quality of product.Sufficient examinations shall be made by the partition manufacturer to ensure that the materials, production and testing comply in all respects with the requirements of this standard. Inspections by the users inspectors shall not absolve the switchgear manufacturer from his responsibility to exercise such quality assurance procedures as to ensure that the requirements and intent of this standard are satisfied.NOTE:Reference should be made to the EN 29000 series of standards forQuality Assurance System.