標準號：BS EN ISO 11125-3-1994
中文標準名稱：涂料和相關產品使用前鋼基體的預處理.噴射金屬清理磨料的試驗方法.硬度測定
英文標準名稱：Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of hardness
標準類型：A29
發布日期：1994/3/15 12:00:00
實施日期：1994/3/15 12:00:00
中國標準分類號：A29
國際標準分類號：25.220.10
適用范圍：Specifies a test method for the determination of the Vickers hardness (using a test force of 9,807 N, i.e. HV 1, when testing particles with a diameter greater than 0,5 mm, and a test force of 4,904 N, i.e. HV 0,5, when testing particles with a diameter of 0,3 mm to 0,5 mm). The method is not recommended for the testing of particle sizes below 0,3 mm. The purpose is to establish the soundness of the metallic abrasive. Significant levels of internal shrinkage or hollow particles will reduce the apparent density. Annex A gives information on the international standards series for metallic blast-cleaning abrasives ISO 11124 and ISO 11125.