標準號：BS EN 61076-4-113-2003
中文標準名稱：電子設備用連接器.經質量評估的印制板連接器.總線設施中印制板和底板用網格為2.54 mm的5列兩件式連接器的詳細規范
英文標準名稱：Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
標準類型：L23
發布日期：2003/3/28 12:00:00
實施日期：2003/3/28 12:00:00
中國標準分類號：L23
國際標準分類號：31.220.10
適用范圍：Connectors for electronic equipment —Printed board connectors —Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications 1 General data 1.1 Recommended method of mounting 1.2 Ratings and characteristics 1.3 Normative references 1.4 Marking 1.5 IEC type designation 1.6 Ordering information 2 Technical information 2.1 Definitions 2.2 Information on application 2.3 Contact arrangements 3 Dimensional information 3.1 General 3.2 Isometric view and common features 3.3 Engagement (mating) information 3.4 Fixed board connectors 3.5 Free board connectors 3.6 Mounting information for fixed board connectors 3.7 Mounting information for free board connectors 3.8 Gauges 4 Characteristics 4.1 Climatic category 4.2 Electrical 4.3 Mechanical 5 Test schedule 5.1 General 5.2 Test schedule tables Annex ZA (normative) Normative references to international publications with their corresponding European publications Figure 1 - Contact arrangements Figure 2 - Contact arrangements Figure 3 - Isometric view Figure 4 - Depth dimensions Figure 5 - Electrical engagement length Figure 6 - First contact point Figure 7 - Perpendicular to engagement (mating) direction Figure 8 - Inclination Figure 9 - Planarity of mounted connectors Figure 10 - Fixed board connector dimensions Figure 11 - Terminations Figure 12 - Free board connector dimensions Figure 13 - Terminations Figure 14 - Hole pattern on panels Figure 15 - Hole pattern on printed boards Figure 16 - Gauge dimensions Figure 17 - Current-carrying capacity Figure 18 - Measuring points Figure 19 - Dynamic stress test arrangement Figure 20 - Arrangement for testing static load, axial Figure 21 - Wiring of specimen Figure 22 - Arrangement for flammability test Figure 23 - Test printed board for fixed and free board connectors Table 1 - Rated voltage Table 2 - Isometric view and common features Table 3 - Depth dimensions Table 4 - Fixed board connector dimensions Table 5 - Dimension of the termination Table 6 - Free board connector dimensions Table 7 - Hole pattern on panels Table 8 - Hole pattern on printed boards Table 9 - Gauges Table 10 - Climatic category Table 11 - Minimum creepage and clearance distances Table 12 - Voltage proof Table 13 - Number of mechanical operations Table 14 - Contact retention in insert Table 15 - Number of specimens