標準號：IEEE C 62.36-2000
中文標準名稱：低壓數(shù)據電路、通信電路和信號傳輸電路用電涌保護器件的試驗方法
英文標準名稱：Test methods for surge protectors used in low-voltage data, communications, and signalling circuits
標準類型：M30
發(fā)布日期：2000/6/30 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：M30
國際標準分類號：29.120.50
引用標準：IEEE Std 455-1985 (Reaff 1992);IEEE Std 487-1992;IEEE Std 743-1995;IEEE Std C62.1-1989 (Reaff 1994);IEEE Std C62.31-1987 (Reaff 1998);IEEE Std C62.32-1981 (Reaff 1997);IEEE Std C62.33-1982 (Reaff 1994);IEEE Std C62.35-1987 (Reaff 2000);IEEE Std C62.41-199
適用范圍：This standard applies to surge protectors for application on multiconductor balanced or unbalanced data,communications, and signaling circuits with voltages equal to or less than 1000 V rms, or 1200 V dc. Thesesurge protectors are designed to limit voltage surges, current surges, or both.This standard describes the methods of testing and criteria for determining the end of life of electrical surgeprotectors used in low-voltage data, communications, and signaling circuits. The surge protectors coveredare multiple-component series or parallel combinations of linear or nonlinear elements, packaged for thepurpose of limiting voltage, current, or both.This standard is not intended to cover packaged single gas tube, air gap, varistor, or avalanche junctionsurge-protective devices, which are included in IEEE Std C62.31-1987,1 IEEE Std C62.32-1981, IEEE StdC62.33-1982, and IEEE Std C62.35-1987, respectively. Specifically excluded from this standard are testmethods for low-voltage power circuit applications. For protection of wire-line communication facilitiesunder the specialized conditions found at power stations, consult IEEE Std 487-1992.The tests in this standard are intended as design tests, as defined in the IEEE Dictionary [B1]2, and provide ameans of comparison among various multiple-component surge protectors.The test criteria and definitions of this standard provide a common engineering language beneficial to usersand manufacturers of multiple-component surge protectors.