標準號:BS EN 12257-2002
中文標準名稱:可運輸儲氣瓶.無縫,環形包裹的復合材料儲氣瓶
英文標準名稱:Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders
標準類型:J74
發布日期:2002/3/28 12:00:00
實施日期:2002/3/28 12:00:00
中國標準分類號:J74
適用范圍:This European Standard specifies minimum requirements for the materials, design, construction,prototype testing and routine manufacturing inspections of composite gas cylinders with a watercapacity up to and including 450 litres for compressed, liquefied and dissolved gases.NOTE For the purposes of this standard, the word “cylinder” includes tubes up to 450 litres water capacity.This standard is applicable to cylinders that comprise a seamless metal liner reinforced over asubstantial part of the parallel length by wound composite fibres of glass, carbon, aramid, or wire.This standard is not applicable to gas cylinders which are almost totally covered with fibres andcommonly called ”fully-wrapped” cylinders. For fully-wrapped composite cylinders see EN 12245.
相關標準
《GB/T 9966.2-2020》天然石材試驗方法 第2部分:干燥、水飽和、凍融循環后彎曲強度試驗 GB/T 9966.2-2020
《GB/T 9966.2-2020》天然石材試驗方法 第2部分:干燥、水飽和、凍融循環后彎曲強度試驗 GB/T 9966.2-2020
《JC/T872-2019》建筑裝飾用微晶玻璃 JC/T872-2019
《GB/T 5137.2-2020》汽車安全玻璃試驗方法 第2部分:光學性能試驗 GB/T 5137.2-2020
《GB/T 5137.2-2020》汽車安全玻璃試驗方法 第2部分:光學性能試驗 GB/T 5137.2-2020
《GB/T2790-1995》膠粘劑180°剝離強度試驗方法 GB/T2790-1995
《GB/T18915.1-2013》鍍膜玻璃第1部分陽光控制鍍膜玻璃 GB/T18915.1-2013
《GB/T3810.4-2016》陶瓷磚試驗方法第4部分:斷裂模數和破壞強度的測定 GB/T3810.4-2016
《GB/T4548-1995》玻璃容器內表面耐水侵蝕性能測試方法及分級 GB/T4548-1995
《GB/T4546-2008》玻璃容器 耐內壓力試驗方法 GB/T4546-2008
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;