標準號：SAE AMS 4195C-2002
中文標準名稱：4.4Cu 1.5Mg 0.60Mn溶液熱處理、冷加工和沉淀硬化熱處理的包鋁鋁合金薄板材和厚板材
英文標準名稱：Aluminum Alloy Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T861 Flat Sheet; 1-1/2% Alclad 2024-T861 Plate) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
標準類型：H61;V11
發布日期：2002/1/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：H61;V11
國際標準分類號：49.025.20
引用標準：ASTM B 660-1996;ASTM B 660-2002;SAE AMS 2202;SAE AMS 2350BA-1989;SAE AMS 2355;SAE AMS 2355F-1992;SAE ARP 823;SAE ARP 823D-1997;SAE MAM 2202;SAE MAM 2355;MIL-H-6088
適用范圍：This specification covers an aluminum alloy in the form of flat sheet and plate 0.500 inch (12.70 mm) and under in nominal thickness. Primarily for structural parts requiring a combination of good strength and maximum corrosion resistance. These products, when re-solution heat treated by the user, may not have the tensile properties shown. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 823 recommends practices to minimize such conditions.