標準號：ASME B4.2-1978
中文標準名稱：優選米制公差與配合
英文標準名稱：Preferred Metric Limits and Fits
標準類型：J04
發布日期：1978/1/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J04
國際標準分類號：17.040.10
適用范圍：This standard describes the ISO system of limits and fits for mating parts as it is approved for general engineering usage in the United States of America. It establishes: (1) the designation symbols used to define specific dimensional limits on drawings, material stock, related tools, gages, etc., (2) the preferred basic sizes (first and second choices), (3) the preferred tolerance zones (first, second and third choices), (4) the preferred limits and fits for sizes (first choice only) up to and including 500 millimeters, and (5) definitions of related terms. Tolerance zones for basic sizes in the range from 500 to 3150 mm are specified in Appendix B. The general terms hole and shaft can also be taken as referring to the space contained by two parallel faces of any part, such as the width of a slot, the thickness of a key, etc.