標準號：DIN EN 778-2010
中文標準名稱：燃燒氣體或燃燒物質的無風扇輔助傳輸、凈熱輸入功率不超過70kW的空間加熱用家用燃氣式強制對流空氣加熱器
英文標準名稱：Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products; German version EN 778:2009
標準類型：Q82
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：Q82
引用標準：EN 88-1-2007;EN 125-1991;EN 126-2004;EN 161-2007;EN 257-1992;EN 298-2003;EN 437-2003;EN 1859-2000;EN 10226-1-2004;EN 10226-2-2005;EN 60335-1-2002;EN 60335-2-102-2006;EN 60529-1992;EN 60730-1-2000;EN 60730-2-1-1997;EN 60730-2-9-2002;EN 61058-1-2002;EN ISO
適用范圍：This European standard specifies the requirements and test methods for the safety and efficiency of domestic gas-fired air heaters with (an) atmospheric burner(s) and without a fan to assist the transportation of combustion air and/or flue gases. This European standard applies to Type B11, B11AS, B11BS, B41, B41AS, B41BS, C11, C21, C31 and C41 appliances with an input not exceeding 70 kW (net cv-basis), intended primarily for use in single unit residential dwellings. Provision of the heated air may be by means of ducting. This standard does not apply to a) appliances of the condensing type; b) appliances for outdoor installation; c) dual purpose air conditioning appliances (heating and cooling); d) appliances where the air is heated by an intermediate fluid; e) appliances with forced draught burners; f) appliances fitted with a manual or automatic means of adjusting the combustion air supply or the combustion products evacuation (including flue dampers); g) portable or transportable forced convection appliances; h) appliances having multiple heating units with a single draught diverter; i) appliances fitted with more than one flue outlet; j) C21 and C41 appliances for 3rd family gases; k) appliances that are designed for continuous condensation within the flue system under normal operating conditions; l) appliances having Products Of Combustion Evacuation Ducts (POCED), that are non-metallic. This European standard is applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals.