標準號：DIN EN ISO 15011-2-2010
中文標準名稱：焊接和相關工藝中的健康和安全.煙塵和氣體取樣的實驗室方法.第2部分:在電弧焊、切削加工和刨削槽時，一氧化碳(CO),二氧化碳(CO
英文標準名稱：Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO
標準類型：C70
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：C70
國際標準分類號：13.040.30;25.160.10
引用標準：ISO/TR 25901;ISO/IEC Guide 98-3
適用范圍：This standard provides guidance of the determination of emission rates of gases and organic vapours generated by arc welding using a fume box technique. It describes the test principle, gives a possible fume box arrangement and consider methods for sampling and analysis. The following gases and organic vapour which can be produced during arc welding are covered:carbon monoxide(CO); Carbon dioxide(CO2); Nitrogen oxide(NO); Nitrogen dioxide(NO2); Organic vapours produced in the arc welding of coated metals, e. g. primed, painted or plastic coated material.