標準號：DIN EN 1634-2-2009
中文標準名稱：門、百頁窗和可開啟窗戶建筑五金組件和元件用防火和煙霧控制試驗 第2部分:建筑五金組件用防火特性試驗
英文標準名稱：Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware - Part 2: Fire resistance characterisation test for elements of building hardware; English version of DIN EN 1634-2:2009-05
標準類型：P16
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：P16
國際標準分類號：13.220.50
引用標準：EN 1154-1996;EN 1363-1-1999;EN 1634-1-2000;EN 1935-2002;EN 12209;EN 12519-2004;EN 13501-1;EN 14600-2005
適用范圍：This European Standard specifies a method for characterizing the influence on fire performance ofitems of building hardware for incorporation into hinged or pivoted vertically installed fire doorassemblies (having either one or two leaves) or vertically installed openable window assemblies, ofknown fire resistance of up to and including 240 minutes integrity (and where relevant insulation) inaccordance with EN 1634-1. It applies to the testing of building hardware for use on hinged andpivoted doors and openable windows which include framed glazed doors and windows, but not glassdoors. It does not include a test for durability or other performance characteristics, which should beevaluated according to the product standard for the item of building hardware or as given inEN 14600.The method is suitable for characterizing building hardware for use on non-metallic door or windowassemblies consisting of cellulosic materials or mineral boards faced with cellulosic materials, hung ineither cellulosic, mineral cored or metal frames: or conventional steel doors made from sheet steel,not more than 1,5 mm thick, hung in steel frames (steel doors include doors filled with mineral boardor mineral fibre cores but not steel clad timber/cellulosic doors). The size of these assemblies can beup to that given in the field of direct application for the door leaf construction concerned.This method is not directly appropriate for evaluating building hardware for use on glass or glazeddoors with decorative perimeter framing. The appropriateness of this method of test can beestablished by reference to the flow chart given in Annex A.This European Standard does not constitute a fire resistance test for a leaf, window, frame,intumescent seal, or anything other than the selected item of building hardware. The use of anyresulting field of direct application is restricted to leaf and frame constructions which have beensuccessfully tested to EN 1634-1. The method has been developed primarily to permit the evaluationof building hardware for hinged or pivoted door assemblies and openable windows, but the method isalso suitable for evaluating some items of building hardware, which are non-edge mounted, for usewith sliding doors and openable windows.