標準號：BS EN 61291-6-1-2008
中文標準名稱：光學放大器.接口.命令集
英文標準名稱：Optical amplifiers - Interfaces - Command set
標準類型：M33
發布日期：2009/3/31 12:00:00
實施日期：2009/3/31 12:00:00
中國標準分類號：M33
國際標準分類號：33.180.30
引用標準：ISO/IEC 8859-1
適用范圍：This part of IEC 61291 describes the optical amplifier command set (OACS) for use incommunicating with and controlling intelligent optical amplifiers. These amplifiers can receiveand possibly respond to such commands by using resident firmware or may be opticalamplifiers controlled by a microprocessor.This standard addresses the structure and content of the command set to control opticalamplifiers. It does not cover the physical or hardware interface, which is assumed to exist forcommunication of this command set to the optical amplifier. The specification of a physicalinterface will be the subject of a separate Part to be developed in the IEC 61291-6 series.The command set described in this standard is intended to enable a user or host to retrievethe amplifier module’s status and/or adjust its settings.This standard lists all of the commands currently defined and supported within the OACSframework. The commands described cover a wide range of applications, and not allcommands will be applicable to every amplifier. To determine the supported commands on anOACS compliant amplifier, please refer to the product specification supplied by themanufacturer.All OACS compliant amplifiers support the full set of “universal” OACS commands. Othercommands, usually specific to a design or implementation, may support some or all of the“optional” commands.