標準號：SAE AMS 3353-2009
中文標準名稱：橡膠:航空器發動機油,燃料和液壓系統中彈性部件用低溫密封Tg-40℉(-40℃),硬度為70～80的碳氟化合物彈性體(FKM)
英文標準名稱：Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -40°F (-40°C)for Elastomeric Parts in Aircraft Engine Oil, Fuel and Hydraulics Systems
標準類型：G43
發布日期：2009/4/14 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G43
國際標準分類號：83.060
引用標準：ASTM D 297-1993;ASTM D 395-2003;ASTM D 412-2006;ASTM D 471-2006;ASTM D 573-2004;ASTM D 1329-2008;ASTM D 1418-2006;ASTM D 3418-2008;SAE AMS 2279A-1993;SAE AMS 2817F-2008;SAE AMS 7379-2008
適用范圍：This specification covers high temperature, compression set and fluid resistant fluorocarbon elastomer material to be used in the form of sheet, strip, tubing, extrusions and molded shapes for aeronautical and aerospace applications. This specification should not be used to address products such as O-rings, compression seals, O-ring cord, and molded-in-place gaskets. For those applications AMS7379 should be used. These products have resistance to a variety of gas turbine engine oils, including high thermal stability (HTS) oils, fuels, and hydraulic fluids, but usage is not limited to such applications. Each application should be considered separately. This fluorocarbon (FKM) has a service temperature range of -60 to +400°F (-51 to +204°C) in air.