標準號：DIN EN 15259-2008
中文標準名稱：空氣質量.固定源排放的測量.測量區域和場所的要求及測量對象、規劃和報告的要求
英文標準名稱：Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report; English version of DIN EN 15259:2008-01
標準類型：Z25
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：Z25
國際標準分類號：13.040.40
適用范圍：This European Standard specifies the following requirements:a) requirements for measurement sections and sites with respect to performing emission measurements;b) requirements for the measurement objective, plan and report of emission measurements of air pollutants and reference quantities to be carried out in waste gas ducts at industrial plants.This European Standard applies to periodic measurements using manual or automated reference methods(RM).This European Standard specifies generic principles which can be applied to perform emission measurementsat different plant types and to meet different measurement objectives.NOTE The measurement objective is specified by the customer. The testing institute identifies the measurementobjective and related regulatory requirements at the beginning of the measurement planning. Where measurements arebeing made for regulatory purposes, the customer should seek approval from the competent authority.This European Standard specifies procedures for taking representative samples in waste gas ducts.This European Standard specifies a procedure for finding the best available sampling point for automatedmeasuring systems used for continuous monitoring of emissions.The planning and reporting aspects of this European Standard are applicable to emission measurements atdiffusive and fugitive emission sources.This European Standard does not address aspects of structural safety of chimneys and ducts, construction ofworking platforms and safety of personnel using them.