標準號：DIN EN 14637-2008
中文標準名稱：建筑五金件.防火/防煙門組件用電氣控制開放系統.要求、試驗方法、應用及維修
英文標準名稱：Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance;English version of DIN EN 14637:2008-01
標準類型：Y71
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：Y71
國際標準分類號：91.060.50;91.190
引用標準：EN 54-1-1996;EN 54-2-1997;EN 54-2/AC-1999;EN 54-4-1997;EN 54-4/AC-1999;EN 54-4/A1-2002;EN 54-5/A1-2002;EN 54-5-2000;EN 54-7/A1-2002;EN 54-7-2000;CEN/TS 54-14-2004;EN 1155-1997;EN 1155/A1-2002;EN 1191;EN 1670-1998;EN 12605;prEN 20650-1;EN 12798;EN 60068-1
適用范圍：This part of EN 14511 specifies minimum requirements which ensure that air conditioners, heat pumps and liquidchilling packages with electrical driven compressors are fit for the use designated by the manufacturer when usedfor space heating and/or cooling.This European Standard applies to factory-made units that can be ducted.This standard applies to factory-made liquid chilling packages with integral condensers or for use with remotecondensers.This standard applies to factory-made units of either fixed capacity or variable capacity by any means.Packaged units, single split and multisplit systems are covered by this standard. Single duct and double duct unitsare covered by the standard.In the case of units consisting of several parts, the standard applies only to those designed and supplied as acomplete package, except for liquid chilling packages with remote condenser. OThis standard is primarily intended for water and brine chilling packages but can be used for cooling any otherliquid subject to agreement.This standard applies to air-to-air air conditioners which evaporate the condensate on the condenser side.The units having their condenser cooled by air and by the evaporation of external additional water are notcovered by this standard.This standard does not apply to units using transcritical cycles, e.g. with CO2 as refrigerant.Installations used for heating and/or cooling of industrial processes are not within the scope of this standard.NOTE Part load testing of units is dealt with in CEN/TS 14825.