標準號：DIN ISO 8133-2008
中文標準名稱：液壓傳動.16MP(160bar)緊湊式系列單桿汽缸.附件的安裝尺寸
英文標準名稱：Hydraulic fluid power - Single rod cylinders, 16 MP (160 bar) compact series - Mounting dimensions for accessories (ISO 8133:2006);English version of DIN ISO 8133:2008-06
標準類型：J20
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J20
國際標準分類號：23.100.20
引用標準：ISO 286-2;ISO 3320;ISO 3322;ISO 5598;ISO 6020-2;ISO 6099
適用范圍：This International Standard specifies the mounting dimensions required for interchangeability of accessoriesfor 16 MPa [160 bar 1)] compact cylinders conforming to ISO 6020-2. The accessories have been designedspecifically for use with cylinders manufactured in accordance with ISO 6020-2, but this does not limit theirapplication.This International Standard covers the following accessories, identified in accordance with ISO 6099:-- AP6: rod eye spherical, female thread (see Figure 1 and Table 1)-- AB5: clevis bracket, spherical eye, in angle (see Figure 2 and Table 2)-- AA7: pivot pin, spherical bearing, locking plate (see Figure 3 and Table 3)-- AL7: locking plate for pivot pin (see Figure 4 and Table 4)-- AP2: rod clevis, female thread (see Figure 5 and Table 5)-- AP4: rod eye plain, female thread (see Figure 6 and Table 6)-- AB2: eye bracket (see Figure 7 and Table 7)-- AB4: clevis bracket, straight (see Figure 8 and Table 8)-- AA4: pivot pin, plain (cotter pin or snap ring type) (see Figure 9 and Table 9)-- AT4: trunnion bracket (see Figure 10 and Table 10)These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The designof these accessories is based on the maximum forces resulting from the specified internal diameters of thecylinders and pressures according to ISO 3320 and ISO $322.This International Standard only applies to the dimensional criteria of products manufactured in conformitywith this International Standard; it does not apply to their functional characteristics.