標準號：IEC 61290-5-1-2006
中文標準名稱：光學放大器.試驗方法.第5-1部分:反射參數.光譜分析方法
英文標準名稱：Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyser method
標準類型：M33
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：M33
國際標準分類號：33.180.30
引用標準：IEC 61291-1
適用范圍：This part of IEC 61290 applies to all commercially available optical amplifiers (OAs) and optically amplified sub-systems. It applies to OAs using optically pumped fibres (OFAs based on either rare-earth doped fibres or on the Raman effect), semiconductor OAs (SOAs), and waveguides (POWAs)The object of this standard is to establish uniform requirements for accurate and reliable measurements, by means of the optical spectrum analyzer test method, of the following OA parameters, as defined in IEC 61291-1:a) maximum input reflectance;b) minimum input reflectance;c) output reflectance.NOTE 1 All numerical values followed by ($) are currently under consideration.NOTE 2 The reflectance test method described in this standard does not apply to distributed fibre Raman amplifiers. The evaluation of reflectance and return loss of the distributed fibre Raman amplifiers is under consideration.NOTE 3 The choice of methods, either the optical spectrum analyzer test method or the electrical spectrum analyzer test method, can depend on equipment availability. Normally, similar results are anticipated from both techniques.