標準號：DIN 267-26-2005
中文標準名稱：緊固件.技術規范.第26部分:螺栓連接件用錐形彈簧墊圈
英文標準名稱：Fasteners - Technical specifications - Part 26: Conical spring washers for bolted connections
標準類型：J13
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J13
國際標準分類號：21.060.30
引用標準：DIN 879-1;DIN 6796;DIN 6908;DIN EN 10089;DIN EN 10132-4;DIN EN ISO 3269;DIN EN ISO 4042;DIN EN ISO 6507-1;DIN EN ISO 6508-1;DIN EN ISO 18265;VDI 2230-1-2003
適用范圍：This standard specifies requirements and methods of test for conical spring washers which are intended foruse with bolt/nut assemblies as dealt with in the following standards:-- DIN 6796 Conical spring washers for bolt/nut assemblies DIN 6908, Conical spring washers for screw and washer assembliesIt is recommended that this standard also be applied for conical spring washers for bolt/nut assemblies whichhave not been standardized.Conical spring washers made from materials other than spring steel are not covered by this standard.NOTE Conical spring washers serve to counteract the loss in inherent tension caused by setting and creep of abolt/nut assembly provided that-- they are sufficiently resilient to increase the overall resilience of the assembly;-- their inherent spring force can compensate for any loss in tension so that the clamping force required to ensure the reliability of the assembly is maintained.There may be relative movement between bolt and nut if the friction between the clamped components isovercome by transverse forces. If this does occur, loosening of the assembly cannot usually be prevented byspring washers.Thus, when using these components, it should be checked whether the spring washers may usefully beemployed as the elements maintaining the clamping force.