標準號：BS EN 13964-2004+A1-2006
中文標準名稱：吊頂.要求和試驗方法
英文標準名稱：Suspended ceilings - Requirements and test methods
標準類型：P32
發布日期：2004/8/23 12:00:00
實施日期：2004/8/23 12:00:00
中國標準分類號：P32
國際標準分類號：91.060.30
引用標準：EN 622-1;EN 717-1;EN 717-2;EN 1396-1996;EN 1912;EN 1991-1-4;EN 1993-1-1;EN 1995-1-1;EN 1998-1;EN 10143;EN 10152;EN 10169-1;EN 10169-3;EN 10244-2;EN 10327;EN ISO 11925-2;EN 12524;EN 12600;EN 12664;EN 12667;EN 13501-1;EN 13501-2;EN 13823;EN 14190;EN 14195;E
適用范圍：This European Standard covers membranes, individual substructure components, substructure kits andsuspended ceiling kits when these are placed on the market. This European Standard also gives certainspecifications for the installed suspended ceiling system, for two reasons: the individual components and kits mayhave to meet certain requirements in order for the installed system to be able to meet the requirement when thesystem is installed, and because it is appropriate, for ease of reference, to give both component/kit requirementand installed system requirement in the same document, given the relationship between them.This European Standard provides information for the various parties responsible for designing, manufacturing andspecifying/selecting suspended ceilings used for interior applications in general building and civil engineeringstructures. It covers suspended ceilings sold as a complete kit, substructures sold as kits, individual components(products) of such substructures, and membrane components. It includes test methods and methods ofassessment, as well as provisions for the evaluation of conformity of the products to the requirements of thisEuropean Standard.In the absence of any other European Standard, this European Standard specifies dimensions, tolerances and,where relevant, performance requirements, for commonly available ceiling substructures and membranecomponents.This European Standard does not cover the following:- ceiling substructures and membrane component covered by other harmonised European Standards, for insituformed ceilings, covered by other European technical specifications, for which it is the installer, not thecomponent manufacturer, who takes responsibility for ensuring that the complete installed suspended ceilingmeets any regulatory requirements to which it is subject;- stretched ceilings covered by EN 14716;- ceilings in mobile buildings, caravans and other forms of transportation;- characteristics needed for special applications, for which additional characteristics other than covered by thisEuropean Standard would need to be complied with;- ceilings subject to water penetration requirements;- ceilings used externally where requirements other than covered by this scope would apply (tunnels, canopies,petrol stations, arcades, open sports facilities, car parks etc.);- heavy duty suspended ceilings or their supporting construction (e.g. ceilings that can be walked on);- ceilings made from fire protective boards covered by ETAG 018-4.This European Standards covers the following essential characteristics:- reaction to fire;- resistance to fire (suspended ceiling kits only);- release of asbestos (content) (suspended ceiling kits and membrane components only);- release of formaldehyde (suspended ceiling kits and membrane components only);- shatter properties (for membrane components of brittle materials in suspended ceiling kits only);- flexural tensile strength;- load bearing capacity;- electrical safety;- direct airborne sound insulation (suspended ceiling kits only);- sound absorption (suspended ceiling kits and membrane components only);- thermal conductivity (suspended ceiling kits and membrane components only);- durability of flexural tensile strength and load bearing capacity against moisture;- condensation.This European Standard also covers the following non-essential requirements:- colour and light reflectance;- installation.