標準號：ISO 21368-2005
中文標準名稱：膠粘劑.膠粘結構的建造和適合這種結構的風險評估申報的指南
英文標準名稱：Adhesives - Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
標準類型：G38
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G38
國際標準分類號：83.180
引用標準：ISO 8502-4;ISO 8504-1;ISO 17212
適用范圍：This International Standard provides guidelines describing the adhesive bonding quality requirements suitable for use by manufacturers utilizing adhesive bonding as a means of fabrication. In particular, the guidelines define various approaches to meeting quality requirements for fabrication and reporting procedures, both in workshops and on site. These guidelines aim to convey the importance of maintaining quality standards in fabrication and reporting procedures, keeping records and thus enabling documentation to provide the basis for risk evaluation of adhesively bonded structures in service and in use. These guidelines have been prepared such that: a) they are independent of the type of adhesively bonded structure; b) they are independent of adhesive manufacturers' and suppliers' product recommendations; c) they define the quality requirements for adhesive bonding in terms of fabrication and reporting procedures, both in workshops and on site; d) they may be used as the basis for risk evaluation of adhesively bonded structures in service and in use; e) they may be used as a basis for assessing a fabricator's capability to produce adhesively bonded structures fulfilling specified quality requirements when they are detailed in one or more of the following: — a contract between the parties involved, — an application standard, — a regulatory statement. The guidelines contained within this International Standard may be adopted in full or selectively chosen by the manufacturer to suit the structure concerned. The guidelines provide a flexible framework for the control of adhesive bonding activities in the following cases: Case 1 The provision of specific requirements for adhesive bonding in contracts which require the manufacturer to have a quality system other than ISO 9001. Case 2 The provision of specific requirements for adhesive bonding as guidance to a manufacturer developing a quality system. Case 3 The provision of specific requirements for references in application standards which uses adhesive bonding as part of its requirements or in a contract between relevant parties. Case 4 The provision of a framework for fabrication and reporting procedures to a quality standard, suitable in particular as a basis for the risk evaluation of adhesively bonded structures.