標準號:BS EN 60335-2-21-2003+A2-2008
中文標準名稱:家用和類似電氣設備安全.第2-21部分:儲水加熱器的詳細要求
英文標準名稱:Household and similar
electrical appliances -
Safety -
Part 2-21: Particular requirements for
storage water heaters
標準類型:Y63
發布日期:2003/4/14 12:00:00
實施日期:2003/4/14 12:00:00
中國標準分類號:Y63
國際標準分類號:91.140.65
適用范圍:This clause of Part 1 is replaced by the following.This International Standard deals with the safety of electric storage water heaters forhousehold and similar purposes and intended for heating water below boiling temperature,their rated voltage being not more than 250 V for single-phase appliances and 480 V forother appliances.Appliances not intended for normal household use but which nevertheless may be a source ofdanger to the public, such as appliances intended to be used by laymen in shops, in lightindustry and on farms, are within the scope of this standard.As far as is practicable, this standard deals with the common hazards presented byappliances that are encountered by all persons in and around the home. However, in general,it does not take into accountNOTE 101 Attention is drawn to the fact that– for appliances intended to be used at high altitudes, additional requirements may be necessary;– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may benecessary;– in many countries additional requirements are specified by the national health authorities, the nationalauthorities responsible for the protection of labour and similar authorities;– in many countries regulations exist for the installation of equipment connected to the water mains.NOTE 102 This standard does not apply to– appliances for boiling water (IEC 60335-2-15);– instantaneous water heaters (IEC 60335-2-35);– commercial dispensing appliances and vending machines (IEC 60335-2-75);– appliances intended exclusively for industrial purposes;– appliances intended to be used in locations where special conditions prevail, such as the presence of acorrosive or explosive atmosphere (dust, vapour or gas).
相關標準
《ASTM E18-20》金屬材料洛氏硬度試驗方法 ASTM E18-20
《GB/T 3177-2009》產品幾何技術規范(GPS) 光滑工件的尺寸檢測 GB/T 3177-2009
《GB/T 1958-2017》產品幾何技術規范 (GPS)幾何公差 檢測與驗證 GB/T 1958-2017
《GB/T 4698.7-2011》海綿鈦、鈦及鈦合金化學分析方法 氧量、氮量的測定 GB/T 4698.7-2011
《GB/T 1958-2017》產品幾何技術規范(GPS)形狀與位置公差檢測規定 GB/T 1958-2017
《GB/T 1958-2017》產品幾何技術規范(GPS)形狀與位置公差檢測規定 GB/T 1958-2017
《GB/T 4698.7-2011》海綿鈦、鈦及鈦合金化學分析方法 氧量、氮量的測定 GB/T 4698.7-2011
《ASTM E10-18》金屬材料布氏硬度標準試驗方法 ASTM E10-18
《ASTM E18-20》金屬材料洛氏硬度標準試驗方法 ASTM E18-20
《ASTM E18-20》金屬材料洛氏硬度的標準試驗方法 ASTM E18-20
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;