標準號：SAE AMS 4095C-2004
中文標準名稱：阿爾克萊德包鋁6.3Cu 0.30Mn 0.18Zr 0.10V 0.06Ti、阿爾克萊德包鋁2219 T31鋁合金薄板和板材.溶解熱處理和冷加工阿爾克萊德包鋁2219-T351薄板.溶解熱處理和應力消除的板材
英文標準名稱：Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T31; Sheet, Solution Heat Treated and Cold Worked Alclad 2219-T351; Plate, Solution Heat Treated and Stress Relieved UNS A82219
標準類型：V11
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：V11
國際標準分類號：49.025.20
引用標準：ANSI H 35.2-2003;ANSI H 35.2M-2003;ASTM B 660-2002;ASTM B 666/B 666;ASTM B 666/B 666M-2001;SAE AMS 2355G-2002;SAE AMS 2772-1997;SAE ARP 823;SAE ARP 823D-1997;SAE AS 1990-1990
適用范圍：This specification covers an aluminum alloy in the form of sheet and plate. These products have been used typically for parts requiring high strength up to 600 degrees F (316 degrees C) and are well suited for cryogenic applications and where welding and maximum corrosion resistance are required, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP823 recommends practices to minimize such conditions.