標準號：ANSI/ASTM E2304a-2003
中文標準名稱：LIF熒光照相膠片劑量測定系統使用的實施規程
英文標準名稱：Practice for Use of a LIF Photo-Fluorescent Film Dosimetry System
標準類型：G81
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G81
國際標準分類號：37.040.25
適用范圍：This practice covers the handling, testing, and procedure for using a lithium fluoride (LiF)-based photo-fluorescent film dosimetry system to measure absorbed dose (relative to water) in materials irradiated by photons or electrons. Other alkali halides that may also exhibit photofluorescence (for example, NaCl, NaF, and KCl) are not covered in this practice. Although various alkali halides have been used for dosimetry for years utilizing thermoluminescence, the use of photoluminescence is relatively new. This practice applies to photo-fluorescent film dosimeters (referred hereafter as photo-fluorescent dosimeters) that can be used within part or all of the following ranges:Absorbed dose range of 5 10 to 3 10 kGy (1-3). Absorbed dose rate range of 0.3 to 2 10 Gy/s (2-5)). Radiation energy range for photons of 0.05 to 10 MeV (2). Radiation energy range for electrons of 0.1 to 10 MeV (2). Radiation temperature range of -20 to +60?C (6, 7). This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.