標準號：ISO 20807-2004
中文標準名稱：無損檢驗.無損檢驗有限應用人員的資格鑒定
英文標準名稱：Non-destructive testing - Qualification of personnel for limited application of non-destructive testing
標準類型：H26
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：H26
國際標準分類號：19.100;03.100.30
適用范圍：1 This International Standard establishes a system for the qualification of personnel who perform NDT applications of a limited, repetitive or automated nature, such as: a) eddy current and electromagnetic sorting of materials; b) eddy current and electromagnetic testing of tubular products during manufacture; c) normal beam ultrasonic testing of plate materials during manufacture; d) ultrasonic thickness testing. These examples are not intended to restrict the range of qualifications which could be covered by this International Standard. 2 This standard therefore does not provide for magnetic particle testing (MT) or liquid penetrant testing (PT). NOTE The arrangements described in ISO 9712 provide sufficient flexibility to allow limited applications of these methods. 3 When the need for qualified non-destructive testing (NDT) personnel is defined in product standards, regulations, codes or specifications, and the nature of the testing to be carried out is limited in scope or automated such that the qualification requirements specified in ISO 9712 are considered inappropriate or excessive, it may be satisfied by qualification in accordance with this International Standard. 4 This International Standard is not intended to supplant the qualification and certification requirements detailed in sector-specific standards, such as ISO 11484:1994 Steel tubes for pressure purposes — Qualification and certification of non-destructive testing (NDT) personnel. 5 The requirements detailed herein apply only to NDT personnel qualified for specific applications, and no direct attempt should be made to equate this to the NDT levels defined in ISO 9712. However, it is recommended that qualified personnel defined in this International Standard be supervised by an appropriately certified NDT level 2 or 3 person as defined in ISO 9712:1999.