標準號:BS EN 1279-4-2002
中文標準名稱:建筑物用玻璃.隔熱玻璃組件.封邊密封件的物理屬性的試驗方法
英文標準名稱:Glass in building - Insulating glass units - Methods of test for the physical attributes of edge seals
標準類型:Q33
發布日期:2002/7/12 12:00:00
實施日期:2002/7/12 12:00:00
中國標準分類號:Q33
國際標準分類號:81.040.20
適用范圍:This European Standard is the product standard for insulating glass units, which defines insulating glass units, and ensures by means of an adequate evaluation of conformity to this standard that over time:
- energy savings are made because the U-value and solar factor do not change significantly;
- health is preserved because sound reduction and vision do not change significantly;
- safety is provided because mechanical resistance does not change significantly.
It covers additional characteristics that are of importance for trade. Marking conditions are included.
For glass products with electrical wiring or connections for e.g. alarm or heating purposes, this standard covers only wiring subject for electrical potential difference to earth less than 50 V a.c. or less than 75 V d.c.
The main intended uses of the insulating glass units are installations in buildings and constructions such as in windows, doors, curtain walling, roofs and partitions where there exists protection against direct ultraviolet radiation at the edges.
NOTE 1 In cases where there is no protection against direct ultraviolet radiation at the edges, such as structural sealant glazing systems, additional European technical specifications should be followed. See Bibliography [4] and [5].
NOTE 2 Units where the nature is only artistic are not part of this standard.
This European Standard, which is inextricably bound up with the other Parts of the standard, covers evaluation of the edge seal strength, and partial evaluation of moisture and gas permeation through sealants, by testing and/or report examination as means of verifying whether a product made in accordance with its system description, and its variations in accordance with prEN 1279-1, conforms with the relevant aspects of the definition of insulating glass units.
相關標準
《ISO9050-2003》建筑玻璃光透率、日光直射率、太陽能總透射率及紫外線透射率及有關光澤系數的測定 ISO9050-2003
《GB/T17413.1-2010》鋰礦石、銣礦石、銫礦石化學分析方法 第1部分:鋰量測定 GB/T17413.1-2010
《GB/T2790-1995》膠粘劑180°剝離強度試驗方法 撓性材料對剛性材料 GB/T2790-1995
《GB/T 17146-2015》建筑材料及其制品水蒸氣透過性能試驗方法 GB/T 17146-2015
《JC/T 1041-2007》混凝土裂縫用環氧樹脂灌漿材料 JC/T 1041-2007 7.4
《GB/T 18915.1-2013 6.5》鍍膜玻璃 第1部分:陽光控制鍍膜玻璃 GB/T 18915.1-2013 6.5 6.5
《GB/T 17146-2015》建筑材料及其制品水蒸氣透過性能試驗方法 GB/T 17146-2015
《GB/T 17146-2015》建筑材料及其制品水蒸氣透過性能試驗方法 GB/T 17146-2015
《GB/T 1037-1988》塑料薄膜和片材透水蒸氣性試驗方法 杯式法 GB/T 1037-1988
《GB/T 9966.3-2020》《天然石材試驗方法 第3部分:吸水率、體積密度、真密度、真氣孔率試驗》 GB/T 9966.3-2020 全部條款
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;