標準號：BS EN 81-3-2000+A1-2008
中文標準名稱：電梯建造和安裝的安全規(guī)則.第3部分:電動和液壓自動回轉送貨機
英文標準名稱：Safety rules for the construction and installation of lifts Part 3： Electric and hydraulic service lifts
標準類型：Q78
發(fā)布日期：2001/1/15 12:00:00
實施日期：2001/1/15 12:00:00
中國標準分類號：Q78
國際標準分類號：91.140.90
引用標準：EN 81-1-1998;EN 81-2-1998;EN 81-58-2003;EN ISO 13857-2008;EN 50214;EN 60068-2-6;EN 60068-2-27;EN 60249-2-2;EN 60249-2-3;EN 60742-1995;EN 60947-4-1;EN 60947-5-1;EN 62326-1;IEC 60664-1-2000;IEC 60747-5;HD 21.3 S3-1999;HD 21.5 S3-2001;HD 21.4 S3-2004;HD 360
適用范圍：1.1 This standard specifies the safety rules for the construction and installation of permanently installed newelectric service lifts with traction or positive drive, or hydraulic service lifts defined as lifting equipment, servingdefined landing levels, having a car, the interior of which is regarded as inaccessible to persons on account ofits dimensions and means of construction, suspended by ropes or chains or supported by a ram and movingbetween rigid vertical guide rails or guide rails whose inclination to the vertical does not exceed 15° and drivenelectrically or hydraulically.This standard covers service lifts with rated load not exceeding 300 kilogrammes and not intended to movepersons.1.2 In addition to the requirements of this standard supplementary requirements shall be considered inspecial cases (potentially explosive atmosphere, extreme climate conditions, seismic conditions, transportingdangerous goods, etc.).1.3 This standard does not cover:a) service lifts with drives other than stated in 1.1;b) important modifications (see annex E) to a service lift installed before this standard is brought intoapplication;c) lifting appliances, such as paternosters, mines lifts, theatrical lifts, appliances with automatic caging, skipsand hoists for building and public works sites, ships’ hoists, platforms for exploration or drilling at sea,construction and maintenance appliances;d) installations where the inclination of the guide rails to the vertical exceeds 15°;e) safety during transport, installation, repairs and dismantling of service lifts;f) the use of glass for the walls of the well, for the car and for the landing doors including the vision panels.However, this standard may usefully be taken as a basis.Noise and vibrations are not dealt with in this standard because these are not relevant to the safe use of theservice lift.Fire propagation is not dealt with in this standard.1.4 To satisfy the condition of inaccessibility to the car, the car dimensions shall not exceed:a) for floor area, 1,0 m2;b) for depth, 1,0 m;c) for height, 1,20 m.The height of 1,20 m shall not be limited if the car comprises several permanent compartments, each of whichsatisfies the above requirements.In particular, lifting equipment intended exclusively for the transportation of goods, but having a car withdimensions exceeding any one of the figures above shall not be entered in the category 'service lifts'.1.5 This standard covers the safety requirements for service lifts with rated speeds up to 1 m/s.NOTE For service lifts with higher rated speeds additional requirements shall be applied as appropriate in order tomaintain the same level of safety.