標準號：IEC 60966-1-1999
中文標準名稱：射頻同軸電纜組件 第1部分:總規范 一般要求和試驗方法
英文標準名稱：Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods
標準類型：L91;K13
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：L91;K13
國際標準分類號：33.120.10
適用范圍：This International Standard specifies requirements for radio frequency coaxial cable assemblies operating in the transverse electromagnetic mode (TEM) and establishes general requirements for testing the electrical, mechanical and environmental properties of radio frequency coaxial cable assemblies composed of cables and connectors. Additional requirements relating to specific families of cable assemblies are given in the relevant sectional specifications. NOTE 1 - The design of the cables and connectors used should preferably conform to the applicable parts of IEC 61196 and IEC 61169 respectively. NOTE 2 - This specification does not include tests which are normally performed on the cables and connectors separately. These tests are described in IEC 61196-1 and IEC 61169-1 respectively. NOTE 3 - Wherever possible, cables and connectors used in cable assemblies, even if they are not described in the IEC 61196 or IEC 61169 series are tested separately according to the tests given in the relevant generic specification. NOTE 4 - Where additional protection is applied to a cable assembly, the mechanical and environmental tests described in this standard are applicable.