標準號：SIS SS-ISO 9367-1-1991
中文標準名稱：應用于Ro/Ro輪船海運的道路車輛應急辦法和安全協議．一般要求．第1部分：商用車以及組合車（半掛車除外）
英文標準名稱：Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships — General requirements — Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded
發布日期：1991/6/5 12:00:00
實施日期：1999/12/31 12:00:00
適用范圍：This part of ISO 9367 specifies the minimum requirements to allow efficient lashing and securing of road vehicles on board roll-on/ioll-off (Ro/Ro) ships, indicating in particular the lashing arrangements on the vehicle and the securing method to be used. It also gives, in annex A, for information to vehicle designers, the securing point arrangements generally used on Ro/Ro ships as laid down by International Maritime Organiz-ation (IMO) recommendations.This part of ISO 9367 applies to road vehicle types defined in 3.2 with a maximum authorized total m?ss of vehicle and cargo, as defined in ISO 1176, of between 3,5 t and 40 t.Semi-trailers will be the subject of a future part of ISO 9367.ISO 9367 does not apply to passenger cars, buses, special vehicles (towing vehicles alone) or commercial vehicles which are not intended for transport on Ro/Ro ships but are being freighted for delivery purposes only without pay-load.NOTE — Road vehicles with characteristics outside the general parameters (particularly where the normal height of the centre of grav-ity is exceeded) necessitate special consideration of the location and number of securing points.