目前EPS規定

提議的EPS新規定

7 GEMS labelling requirements

Labelling and communication requirements

(1) For paragraphs 24 (1) (b), 26 (1) (a) and 26 (1) (b) of the Act, the specified labelling and communication requirements for products covered by this Determination are the requirements mentioned in clause 5.1 of AS/NZS 4665.2:2005 and Appendix A of AS/NZS 4665.1:2005 in relation to the energy performance mark to be shown on the product.

8 GEMS labelling requirements

Labelling and communication requirements

(1) For paragraphs 24 (1) (b), 26 (1) (a) and (b) of the Act, the specified labelling and communication requirements for a product class mentioned in subsection 6 (2)are:

(a) the requirements mentioned inAppendix A of AS/NZS 4665.1:2005 and section 5 of AS/NZS 4665.2:2005 (Energy Performance Mark) in relation to the energy performance mark to be shown on the product; or

(b)¹ if a product exceeds the energy performance requirements for Mark V as mentioned in Appendix A of AS/NZS 4665.1:2005 then the product may:

(i) be labelled in accordance with the requirements of that standard for Mark V; or

(ii) be labelled in accordance with the requirements of the IEMP for Mark VI.

8 Other GEMS requirements

High efficiency level

(1) For subsection 24 (2) and paragraph 27 (1) (a) of the Act, the specified requirements for products covered by this Determination to meet the high efficiency level are the requirements mentioned in this section.

Note: This provisions that follow specify the requirements for products to be designated as “high efficiency IV” or “high efficiency V” for the purposes of GEMS.

High efficiency level IV requirements (HE IV)

(2) The specified requirements for high efficiency level IV (HE IV) are as follows:

(a) for product classes 1 to 2—the requirements mentioned in subclause 3.1.1 of AS/NZS 4665.2:2005 (No Load Power Consumption and Average Active Mode Efficiency); and

(b) for product classes 3 to 4—the requirements mentioned in subclause 3.1.2 of AS/NZS 4665.2:2005 (Average Active Mode Efficiency).

High efficiency level V requirements (HE V)

(3) The specified requirements for high efficiency level V (HE V) are as follows:

(a) for product classes 1 to 2—the requirements mentioned in subclause 3.2.1 of AS/NZS 4665.2:2005 (No Load Power Consumption and Average Active Mode Efficiency); and

(b) for product classes 3 to 4—the requirements mentioned in subclause 3.2.2 of AS/NZS 4665.2:2005 (Average Active Mode Efficiency).

(4) For subsection 24 (2) and paragraph 27 (1) (e) of the Act, the requirements for conducting tests are the same as those mentioned in subsection 6 (2) to (4) (inclusive) of this Determination.

9 Other GEMS requirements

High efficiency level

(1) For subsection 24 (2) and paragraph 27 (1) (a) of the Act, the specified requirements for a product class mentioned in subsection 6 (2) to meet the high efficiency level are:

(a) the requirements mentioned in section 3 of AS/NZS 4665.2:2005 (High Efficiency Levels) for that product class; or

(b) the performance requirements for Mark VI mentioned in the IEMP.²