欧洲处破女www人鲁,亚洲无玛,国产bbaaaaa片,三年片在线观看免费播放大全电影国语版

百檢網首頁 我的訂單 400-101-7153

EN ISO 15874塑料管及接頭CE認證

作者：百檢網 時間：2021-11-01 來源：互聯網

　　
塑料管及接頭CE認證：PP塑料管及接頭，PVC塑料管及接頭
　　PP塑料管及塑料管接頭CE認證符合建材CPR指令-Regulation 305/2011/EU on Construction Products Regulation
　　PP-R塑料管，PPR塑料管接頭，以及PP-H，PP-B，PP-RCT管件及管接頭的CE認證依據的標準如下：
　　?EN ISO 15874-1-2013;Plastics piping systems for hot and cold water installations-Polypropylene(PP)–Part 1:General塑料PP–基本要求
　　ISO 15874 2:2013,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 2:Pipes塑料PP–管件
　　ISO 15874 3,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 3:Fittings塑料PP–管接頭
　　EN ISO 15874-5-2013Plastics piping systems for hot and cold water installations-Polypropylene(PP)–Part 5:Fitness for purpose of the system
　　塑料管及塑料管接頭CE認證符合建材CPR指令-Regulation 305/2011/EU on Construction Products Regulation
　　冷熱水安全管件及管接頭的CE認證依據的標準如下：
　　?EN ISO 15874-1-2013;Plastics piping systems for hot and cold water installations-Polypropylene(PP)–Part 1:General塑料PP–基本要求
　　ISO 15874 2:2013,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 2:Pipes塑料PP–管件
　　ISO 15874 3,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 3:fittings塑料PP–管接頭
　　EN ISO 15874-5-2013Plastics piping systems for hot and cold water installations-Polypropylene(PP)–Part 5:Fitness for purpose of the system
　　ISO 15875-1,Plastics piping systems for hot and cold water installations—Crosslinked polyethylene(PE-X)-Part 1:General塑料PE-X–基本要求
　　ISO 15875-2,Plastics piping systems for hot and cold water installations—Crosslinked polyethylene(PE-X)-Part 2:Pipes塑料PE-X–管件
　　ISO 15875-3,Plastics piping systems for hot and cold water installations—Crosslinked polyethylene(PE-X)-—Part 3:fittings塑料PE-X–管接頭
　　ISO 15875-5,Plastics piping systems for hot and cold water installations—Crosslinked polyethylene(PE-X)–Part 5:Fitness for purpose of the system
　　ISO 15876-1,Plastics piping systems for hot and cold water installations—Polybutylene(PB)–Part 1:General塑料PB–基本要求
　　ISO 15876-2,Plastics piping systems for hot and cold water installations—Polybutylene(PB)–Part 2:Pipes塑料PB–管件
　　ISO 15876-3,Plastics piping systems for hot and cold water installations—Polybutylene(PB)—Part 3:fittings塑料PB–管接頭
　　ISO 15876-5,Plastics piping systems for hot and cold water installations—Polybutylene(PB)–Part 5:Fitness for purpose of the system
　　ISO 15877-1,Plastics piping systems for hot and cold water installations—Chlorinated poly(vinyl chloride)(PVC-C)-Part 1:General PVC塑料基本要求
　　ISO 15877-2,Plastics piping systems for hot and cold water installations—Chlorinated poly(vinyl chloride)(PVC-C)-Part 2:Pipes PVC管
　　ISO 15877-3,Plastics piping systems for hot and cold water installations—Chlorinated poly(vinyl chloride)(PVC-C)-Part 3:fittings PVC管接頭
　　ISO 15877-5,Plastics piping systems for hot and cold water installations—Chlorinated poly(vinyl chloride)(PVC-C)-Part 5:Fitness for purpose of the system
　　ISO 22391,Plastics piping systems for hot and cold water installations–Polyethylene of raised temperature resistance(PE-RT)
　　深圳百檢網專業的建材產品CE認證服務，公告號機構授權代表，建材測試認證的經驗為您提供****的高質量的測試評估和認證。CE認證同時我們還為您提供高質量的DOP文件編寫和技術文件整理。塑料管測試樣品：3個
　　完成塑料管或塑料管接頭CE認證后可加貼CE標記，產品上加貼信息和CE標記如下
　　–Number of this International Standard符合的標準，比如EN ISO15874
　　–Manufacturer’s name and/or trade mark制造商名稱
　　–Nominal outside diameter and nominal wall thickness外徑尺寸和管件厚度
　　–Pipe dimension class管件尺寸等級，如A
　　–Material材料，如PPR
　　–Application class combined with operating pressure類別和壓力，如class 1/10BAR
　　–Opacity能力
　　–Manufacturer’s information制造商信息
　　plastics piping systems
　　ISO 15874 consists of the following parts1)under the general title Plastics piping systems for hot and cold water
　　installations—Polypropylene(PP):
　　—Part 1:General
　　—Part 2:Pipes
　　—Part 3:Fittings
　　—Part 5:Fitness for purpose of the system
　　—Part 7:Guidance for the assessment of conformity[Technical specification]
　　ISO 15875,Plastics piping systems for hot and cold water installations—Crosslinked polyethylene(PE-X)
　　ISO 15876,Plastics piping systems for hot and cold water installations—Polybutylene(PB)
　　ISO 15877,Plastics piping systems for hot and cold water installations—Chlorinated poly(vinyl chloride)(PVC-C)
　　ISO 22391,Plastics piping systems for hot and cold water installations–Polyethylene of raised temperature
　　resistance(PE-RT)
　　ISO 15874?2:2013,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 2:Pipes
　　ISO 15874?3,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 3:Fittings
　　ISO 472,Plastics—Vocabulary
　　ISO 1043-1,Plastics—Symbols and abbreviated terms—Part 1:Basic polymers and their special characteristics
　　ISO 4065,Thermoplastics pipes—Universal wall thickness table
　　ISO 1133-1,Plastics—Determination of the melt mass-flow rate(MFR)and the melt volume-flow rate(MVR)
　　of thermoplastics—Part 1:Standard method
　　ISO 1167-1 Thermoplastics pipes,fittings and assemblies for the conveyance of fluids—Determination of the
　　resistance to internal pressure—Part 1:General method
　　ISO 1167-2 Thermoplastics pipes,fittings and assemblies for the conveyance of fluids—Determination of the
　　resistance to internal pressure—Part 2:Preparation of pipe test pieces
　　ISO 2505 Thermoplastics pipes—Longitudinal reversion—Test methods and parameters
　　ISO 3126 Plastics piping systems—Plastics components—Determination of dimensions
　　ISO 4065:1996,Thermoplastics pipes—Universal wall thickness table
　　ISO 7686 Plastics pipes and fittings—Determination of opacity
　　ISO 9080 Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of
　　thermoplastics materials in pipe form by extrapolation
　　ISO 9854-1:1994 Thermoplastics pipes for the transport of fluids—Determination of pendulum impact strength
　　by the Charpy method—Part 1:General test method
　　ISO 9854-2:1994,Thermoplastics pipes for the transport of fluids—Determination of pendulum impact strength
　　by the Charpy method—Part 2:Test conditions for pipes of various materials
　　ISO 15874-1:2013,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—
　　Part 1:General
　　ISO 15874-3,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 3:Fittings
　　ISO 15874-5,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 5:
　　Fitness for purpose of the system
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺，是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務，簡化檢測流程，提升檢測服務效率，利用互聯網+檢測電商，為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率，打破行業壁壘，打造出行業創新的檢測平臺。

百檢能給您帶來哪些改變？

1、檢測行業全覆蓋，滿足不同的檢測；

2、實驗室全覆蓋，就近分配本地化檢測；

3、工程師一對一服務，讓檢測更精準；

4、免費初檢，初檢不收取檢測費用；

5、自助下單 快遞免費上門取樣；

6、周期短，費用低，服務周到；

7、擁有CMA、CNAS、CAL等權威資質；

8、檢測報告權威有效、中國通用；

客戶案例展示

  • 上海朗波王服飾有限公司
  • 浙江圣達生物藥業股份有限公司
  • 天津市長慶電子科技有限公司
  • 桑德斯微電子器件（南京）有限公司
  • 上海嘉疊貿易有限公司
  • 上海紐特絲紡織品有限公司
  • 無錫露米婭紡織有限公司
  • 東方電氣風電（涼山）有限公司
  • 寧波圖米文具用品有限公司
  • 江蘇力之創特種裝備制造有限公司

相關資訊

暫無相關資訊

行業熱點

百檢網
主站蜘蛛池模板： 怀化市| 邵阳市| 沧州市| 新民市| 灌南县| 大同县| 清水河县| 寿阳县| 龙山县| 澄江县| 平乐县| 呼图壁县| 左贡县| 康保县| 蚌埠市| 邻水| 交城县| 万载县| 江口县| 墨玉县| 九江县| 鹤山市| 乡城县| 岫岩| 耿马| 黄山市| 峡江县| 吴桥县| 海晏县| 同德县| 宁明县| 临高县| 新余市| 斗六市| 台北县| 山丹县| 贡嘎县| 德州市| 贵溪市| 奇台县| 武功县|